The Oliver 4710 Shaper is built to dish out whatever cuts you need. The beefy spindle is reversible and locks, helping you to change a wide variety of blades quickly. The cast iron miter gauge on both machines has a hold down, too. A five speed step pulley system gives you a wide range of speeds, from 3,000 to 10,000 RPM. All this powered by a 5HP motor on a heavy cast iron base and you've got a machine built the Oliver way. Read on, download a spec sheet, or ask your Oliver Dealer for more info on the 4710 and 4750!
| Model No. | 4710 |
| Stock No. (5HP, 1Ph) | 4710.001 |
| Stock No. (5HP, 3Ph) | 4710.002 |
| Table Dimensions (in.) | 41-1/2 x 29-1/2 |
| Table Height (in.) | 34-1/4 |
| Sliding Table Travel (in.) | n/a |
| Sliding Table Size (W x L/in.) | n/a |
| Spindle Speed (RPM) | 3000, 4000, 6000, 8000, 10,000 |
| Spindle Direction | Reversible |
| Maximum Tool Diameter Above Table (in.) |
7 |
| Maximum Tool Diameter Above Table (in.) |
10 |
| Vertical Spindle Travel (in.) | 6 |
| Spindle Diameter (in.) | 1-1/4 |
| Dust Collector Port Diameter (in.) | 4 |
| Minimum CFM Required | 800 |
| Shipping Dimensions (L x W x H/in.) | 45 x 38 x 42 |
| Motor | 5HP, 1Ph, 220V Only or 5HP, 3Ph, 220/ 440V, Prewired 220V |
| Gross Weight (lbs.) | 950 |
