The Oliver 4470 25” Planer  puts other planers to shame. With two full feet of cutting width, over 9” of cutting capacity, and the ability to take up to 1/4” off in a single pass, this planer will take whatever you can dish out. The Digital Thickness Controller and Powered Table Travel eliminate guesswork, make dialing in settings a breeze. But ease of operation isn’t everything, this Oliver outputs stock that’s true and straight. A Sectional Infeed Roller and Chip Breaker apply uniform pressure on uneven stock, coupled with a Driven Outfeed Roller to keep your stock in place. Add a powerful 10HP motor, and you’ve got a planer that’s ready to tackle anything! Read on, download a spec sheet, or ask your Oliver Dealer for more info on the 4470!

Model No. 4470
Stock No. (10HP, 1Ph) 4470.001 - Straight
Stock No. (15, 3Ph) 4470.002 - Straight
Stock No. (10HP, 1Ph) 4470.101B - Byrd Helical
Stock No. (15, 3Ph) 4470.202B - Byrd Helical
Maximum Stock Width (in.) 24
Maximum Stock Thickness (in.) 9-1/4
Minimum Stock Thickness (in.) 1/25
Minimum Stock Length (in.) 10
Dust Port Diameter (in.) 5
Minimum CFM Required 900
Segmented Infeed Roller Diameter (in.) 3
Two Steel Outfeed Roller Diameter (in.) 3
Feed Speeds (FPM) 20, 25 and 30
Bed Rollers 2, Adjustable
Table Size (L x W/in.) 32 x 26
Cutterhead Diameter (in.) 3-1/2
Number of Knives (straight) 4
Number of Knives (30mm helical) 102
Number of Knives (Byrd) 125
Number of Knives ( 4-Side helical) 174
Cutterhead Speed (RPM) 4,800
Table Support 2-Column
Motor 10HP, 1Ph, 220V Only
  15HP, 3Ph, 220V/440V, Prewired 220V
Shipping Dimensions (L/W/H) 53"x34"x59"
Gross Weight (lbs.) 1,837
  • Four Knife Cutterhead or Byrd Helical Available
  • Three Feed Speeds: 20, 25, and 30 FPM
  • Powerful 10HP or 15HP Motor
  • Segmented Infeed Roller and Sectional Chip Breaker
  • Two Driven Outfeed Rollers
  • Digital Thickness Controller and Up/Down Powered Table Travel