The 16” top and bottom planer is capable of machining both the top and bottom surfaces of a work piece in a single pass. The infeed table being adjustable up and down gets rid of unwanted cups or bows. Four driven feed rollers with the first one being segmented allows the operator to feed multiple pieces of varying thickness. The horsepower was not spared on this machine either. Each cutterhead gets its own motor ensuring that even the wildest stock gets tamed. 2-1/4” diameter columns guarantee sturdy cutter head support and accuracy as well as longevity.
| SPECIFICATIONS | |
| Model No. | 5220 |
| Stock No. (5HP/3HP, 1Ph) | 5220.201 |
| Stock No. (7.5HP/5HP, 3Ph) | 5220.202 |
| Maximum Stock Width (in.) | 16 |
| Maximum Cuttnig Depth of Upper Cutter | Stock Width Below 6":3/16" |
| Maximum Cutting Depth Upper Cutter |
Stock Width Over 6":1/16" |
| Lower Cutter |
1/8" |
| Maximum Thickness |
6" |
| Feed Speed |
15-20 FPM |
| Cutterhead Speed |
6,000 RPM |
| Cutterhead Diameter Upper & Lower Cutter |
2-7/8" |
| Number of Knives - Helical |
108 Per Head |
| Dust Port Diameter |
5" (x2) |
| Table Dimensions w/o Extensions |
44" x 17-3/4" |
| Table Dimensions w/ Extensions | 56" x 17-3/4" |
| Motor, 1Ph - 3450 RPM |
Top 5HP, 220v, 60Hz Bottom 3HP, 220v, 60Hz |
| Motor, 3Ph - 3450 RPM | Top 7.5HP, 220v, 60Hz Bottom 5HP, 220v, 60Hz |
| Shipping Dimensions (L/W/H) | 56"x40"x55" |
| Gross Weight (lbs.) | 1,210 |
