6893 5235 Copy
6958
6955
6945
6939
6938
6937
6936
6913
6910
6909

5235 24” Jointer-Planer

  • Heavy cast-iron and steel construction allow heavy consistent cuts.
  • Twin 25HP TEFC motors independently power the large cutter heads.
  • 5HP TEFC feed motor easily handles heavy stock during each pass.
  • Universal joint drive delivers smooth powerful stock feeding.
  • Matched 6 V-belt drive smoothly transfers power to the cutter heads.
  • Central control panel allows quicker set up and operation.
  • Digital thickness control assist in producing outstanding results.
  • Variable speed control provides a feed rate up to 90 feet per minute.
  • Segmented feed fingers move up to 3/4” and are adjustable
  • Helical heads are easy to access for quicker maintenance.
  • Each cutter head features 105 inserts for rapid smooth stock removal.
  • Fine adjustment of Infeed table is easily done with a large hand wheel.
  • Magnetic controls for safer operation.
  • Special order 4-sided insert cutter head available
Find a dealer
  • Heavy cast-iron and steel construction allow heavy consistent cuts.
  • Twin 25HP TEFC motors independently power the large cutter heads.
  • 5HP TEFC feed motor easily handles heavy stock during each pass.
  • Universal joint drive delivers smooth powerful stock feeding.
  • Matched 6 V-belt drive smoothly transfers power to the cutter heads.
  • Central control panel allows quicker set up and operation.
  • Digital thickness control assist in producing outstanding results.
  • Variable speed control provides a feed rate up to 90 feet per minute.
  • Segmented feed fingers move up to 3/4” and are adjustable
  • Helical heads are easy to access for quicker maintenance.
  • Each cutter head features 105 inserts for rapid smooth stock removal.
  • Fine adjustment of Infeed table is easily done with a large hand wheel.
  • Magnetic controls for safer operation.
  • Special order 4-sided insert cutter head available
Model No.
5235
Stock No.
5235.101
Maximum Stock Width
24”
Maximum Stock Thickness
8”
Minimum Stock Length
12
Minimum Stock Thickness
1/4”
Feed Speed
20 ~ 90 FPM
Number of Knives Per Cutter Head
105 (2-side) 180 ( 4-side)
Knife Size (2-Sided)
30mm x 12mm x 2.5mm
Knife Size (4-Sided)
15mm x 15mm x 2.5mm
Cutterhead Diameter
5.3”
Cutterhead Speed
4,600 RPM
CFM
4,200
Table Surface
Hardened Chrome
Dust Port Diameter
6"
Motor (Bottom Cutterhead)
25HP, 3Ph, 220V/440V* Prewired 220V
Motor (Top Cutterhead)
25HP, 3Ph, 220V/440V* Prewired 220V
Motor (Feed)
7.5HP, 3Ph, 220V/440V* Prewired 220V
Motor (Table Elevation)
1HP, 3Ph, 220V/440V* Prewired 220V
Overall Dimensions
115” L x 75” W x 77” H
Gross Weight
9,700 lbs